FloraMax Cloner is a protective stem dip for treating cuttings prior to planting:
- Its specialized gel formulation provides a protective coating on the cut-end. This helps seal the cut and prevent air bubbles from entering the stem tissue. NOTE, FloraMax Cloner is a much thinner gel than competing brands. This design feature allows for a higher rate of absorption into the cutting and provides faster results than thicker formulations.
- Has an indefinite shelf-life and is resistant to drying-out.
- Has high resistance to cross contamination and does not go rank in the bottle.
- Dosage: Predip cuttings prior to planting
FloraMax Clone Spray contains a carefully balanced combination of macro and trace elements that are essential for clones and seedlings:
- Promotes vigorous root growth
- Promotes strong, healthy foliage
- Helps prevents wilting of stems and leaves
- Helps reduce the effects of stress during transplant to enable transition-less growth through to late veg phase
- Clone Spray contains its own “plant specific” wetting agent. This enables maximum leaf uptake of Clone Spray’s ingredients. Also, unlike many wetters, Clone Spray’s wetting agent is safe to use on delicate plant tissue
- Dosage: 25 ml/L (25ml /Qrt). Apply to clones and seedlings through to mid-veg
FloraMax Silica contains 16% silica present as Mono-silicic Acid (“MSA”) and Meta-silicic Acid (“MTSA”)* . Both of these compounds are bio-available forms of silica and are completely soluble in nutrient solutions. This yields several benefits for hydroponic growers:
- Improves the rigidity of stems and leaves.
- Helps prevent leaf wilt during extreme heat.
- Increases weight, potency and shelf-life of fruit.
- FloraMax Silica is highly concentrated and readily absorbed by plants (Monosilicic Acid and Metasilicic Acid).
- FloraMax Silica is highly stable – shelf-life exceeds 20 years (testing origins predate 1998).
- Dosage: 0.1-0.25ml/L (0.25 – 1 ml/Gal) during veg and flower. Silica should be applied to an existing nutrient solution and used throughout both veg and flower. Silica is also very effective as a foliar spray at 3ml/L (3ml/Qrt).
FloraMax Ca-Mg-Fe is a powerful ‘cure-all’ against deficiency symptoms that are common in fast growing flowering plants especially where high pH waters are used:
- Ca-Mg-Fe helps prevent or cure leaf yellowing, leaf curl, stunted growth, withered fruit-set and bud rot.
- Ca-Mg-Fe excels where “high pH” waters are used, or when nutrient solutions are subject to volatile changes in pH and EC.
- Ca-Mg-Fe helps prevent ALL “trace element” deficiencies – arguably the most common type of deficiency! This is achieved by including all SIX* essential trace elements at a meaningful concentration. Further, these trace elements are in an ‘alkaline-stable’ form, hence should pH rise above 6.5 and as high as 10, the nutrient solution’s trace element component will be fully protected.
*Iron, copper, manganese, zinc, molybdenum and boron
- Ca-Mg-Fe compliments existing base nutrients that are simply deficient in cal-mag and essential trace elements.
- Dosage: 1-2ml/L (4-7.5ml/Gal) during veg and flower.
FloraMax System Maintenance is a safe, organic additive for maintaining the condition of nutrient solutions:
- Prevents the blockage of drippers, pipes, pumps and filters. Helps stop white, stringy muck from forming in the nutrient solution to increase the reliability of watering systems. These issues are common where organic, carbohydrate or sugary additives are being used, or if the nutrient temperature is too high.
- Compatible with all nutrient types including sensitive organics, enzymes and beneficial bacteria.
- Is safe to use from seed to harvest which ensures the growing system delivers consistent yields all year round.
- Also serves as a cleaner for tools and system hardware especially during post harvest clean-up.
- Dosage: 1ml/L (4ml/Gal) during veg and flower.
FloraMax Resin-XS was designed to meet the critical demands of growers wanting larger yields. There is no other flowering additive able to compete in terms of quality of yield, cleanliness and ease-of-use:
- Resin-XS helps improve fruit quality and development
- Resin-XS is PGR free
- Resin-XS will NOT induce foul residues or odors in the reservoir, nor cause blockages to drippers and filters. The unique ingredients used in Resin-XS are extremely stable thereby resulting in greater reliability and consistency for growers
- Dosage: 3-4 ml/L (11-15 ml/Gal). Use from about the third week in bloom up until harvest.
FloraMax Flowering Enhancer’s unique 3-in-1 action radically simplifies flowering and enhances final yield:
- Promotes strong and healthy floral blooms: Flowering Enhancer contains a carefully balanced combination of phosphorus (P) and potassium (K). This provides the necessary base levels of “PK” for the flowering phase of plant growth. PK is essential for promoting large and vigorous floral blooms
- Replaces Cal-Mag-Iron additives and prevents common growth deficiencies: Flowering Enhancer contains high levels of calcium, magnesium (0.4%) and iron chelate (aka “cal-mag-iron”). This simplifies growing by preventing the need for a standalone “cal-mag” additive – EVEN when using RO, rain water or coco as a growing medium. Cal-Mag-Iron helps prevent common deficiency symptoms such as leaf yellowing / chlorosis, leaf curl, stunted growth and withered fruit-set
- Strengthens plant structure during heavy fruiting stages: The combination of calcium and magnesium will help strengthen the plant structure during late bloom when plants may have to bear the weight of heavy fruit and will assist plants in their capacity to utilise phosphorus. Research indicates that Phosphorous can increase the dry weight at harvest
- Prevents the need for pH maintenance: Flowering Enhancer improves the working nutrient’s pH buffering capacity by over 500%. This helps lock pH below 6.5 and stabilizes the working nutrient solution to help prevent pH-related deficiency symptoms, even when hard water or alkaline additives are used. For soil and coco, pH adjustment is rarely needed. For recirculating systems, growers will require about FIVE times ‘less’ pH Down than normal
- Dosage: 2ml/L (7.5ml/Gal) throughout flowering phase
FloraMax Organabud is the cleanest kelp additive on the market!
The combination of unique ingredients used in OrganaBud create revolutionary stability and efficacy.
- OrganaBud contains extracts of Ascophyllum Nodosum kelp
- OrganaBud is completely soluble and resistant to causing blocked drippers, build-ups, foul odors or foaming in the nutrient reservoir
- Is compatible with hydroponics, coco-fibre and soil systems including DWC, aeroponics and NFT
- OrganaBud has a 3 year plus shelf-life to help ensure reliability
- Dosage: 1-2ml/L (4-7.5ml/Gal) during veg and flower.
FloraMax Root-XS promotes explosive root growth. This helps accelerate plant growth and achieve faster crop rotation.
- Helps reduce the effects of stress during transplant to enable rapid and ‘stable’ plant growth through all stages of development. Plants can generally be pushed harder enabling faster crop rotation.
- Produces greener, healthier foliage and fruits with less signs of stress.
- Root-XS will NOT induce foul residues or odours in the reservoir, nor cause blockages to drippers and filters. The unique ingredients used in Root-XS are extremely stable thereby resulting in greater reliability and consistency for growers.
- Suitable as both a root feed and foliar spray.
- Dosage: 2ml/L (7.5 ml/Gal) in seed and veg; 0.5ml/L (2 ml/Gal) in bloom.
FloraMax VegaFlora A+B is a professional 2-part nutrient that meets the demands of commercial cropping in hydroponics, soil or coco coir.
- VegaFlora is a single AB formula that performs flawlessly from seed to harvest in hydro, coco and soil. This is ideal for commercial grows as it only requires two feed-lines and radically simplifies stock management. Additional use of PK additives will complement VegaFlora in flower to eliminate the need for a separate grow and bloom base nutrient.
- VegaFlora is capable of handling salty and high pH waters – as found in many bore/well-sourced groundwaters. VegaFlora will resolve or improve associated problems such as blocked drippers and a “cloudy” nutrient solution.
- VegaFlora is completely soluble, runs extremely clean and has exceptional long-term stability. When VegaFlora is used as directed in run-to-waste applications, the reservoir will remain stable for several weeks provided evaporation and light ingress are minimized. VegaFlora is also ideal for use with auto-dosing systems.
- No “cal-mag” required. When VegaFlora is used as directed, no “cal-mag” additive or extra nitrogen is needed.
- There are no tedious dosing procedures with VegaFlora – there is no waiting! Simply measure, pour then stir.
- VegaFlora is highly pH buffered: In soil and coco applications, pH adjustment is rarely required. When used with FloraMax Flowering Enhancer growers will require about FIVE times ‘less’ pH Down than what they would normally use.
- VegaFlora contains premium grade ingredients including fully chelated trace metals such as Iron DTPA and Iron EDDHA. The ingredients are stabilized in solution and carefully balanced to eliminate any risk of toxicity and ensure the best flavoured fruits. Also, VegaFlora is so stable it has a 10-year shelf-life.
- Dosage: 1.7 – 3.0ml/L (6.5 – 11.5 ml/Gal).
FloraMax Veg-1 is a 1-part base nutrient – only 1 bottle from seed-to-harvest!
If ease-of-use is as important to you as yield and flavour then FloraMax Veg-1 should be your #1 choice in nutrients.
- Veg-1 is a single-bottle that performs flawlessly from seed to harvest in hydro, coco and soil. This is ideal for commercial grows as it only requires ONE feed line and radically simplifies stock management. Additional use of PK additives will complement Veg-1 in flower to eliminate the need for a separate grow and bloom base nutrient.
- Veg-1 is ideal for salty, hard and high pH waters – as found in many bore/well-sourced groundwaters. Veg-1 will resolve or improve associated problems such as blocked drippers and a “cloudy” nutrient solution.
- Veg-1 is completely soluble, runs extremely clean and has exceptional long-term stability. When Veg-1 is used as directed for run-to-waste systems, the reservoir can be stable for up to three months provided evaporation and light ingress are minimized. Veg-1 is also ideal for use with auto-dosing systems.
- No “cal-mag” required. When Veg-1 is used as directed, no “cal-mag” additive or extra nitrogen is needed.
- Veg-1 has greater pH stability than most 2-parts. Veg-1 is designed to tolerate reservoir pH levels 15-20% higher than competing products thus providing additional insurance against high pH water. In soil and coco applications, pH adjustment is rarely required. When used with FloraMax Flowering Enhancer growers will require about FIVE times ‘less’ pH Down than what they would normally use.
- There are no tedious dosing procedures with Veg-1 – there is no waiting! Simply measure, pour then stir.
- Veg-1 contains premium grade ingredients including fully chelated trace metals such as Iron DTPA. The ingredients are stabilized in solution and carefully balanced to eliminate any risk of toxicity and ensure the best flavoured fruits. Also, Veg-1 is so stable it has a 10-year shelf-life
- Dosage: 3.5 – 6.4 ml/L (13-24 ml/Gal).
