Telos Mesh Driver Upgrade

The new Telos mesh driver upgrade will enable anyone who owns a Telos 0006, 0008 and 0010, whether it’s a V1, V1.1, Pro or Slimine to upgrade. Even customers who brought an Original Telos-0008 at launch over 5 years ago can easily upgrade to Telos mesh!

The Mesh Upgrade Kits include either a 200w or 320w mesh-integrated waterproof driver, high quality IP66 rated connectors and a 4mm hex screwdriver to complete the swap using our clear instructions.

The 320 mesh driver will be used to upgrade Telos 10 and Telos 8 models and the 200w driver will be used to upgrade Telos 6 models.

Privacy and Security is at the core of the Telos Mesh design and all commands are sent with end to end encryption. Firstly the user is in control, the bluetooth functionality doesn’t turn on until activated by the user using the touchpad.

When bluetooth is activated you can connect to the network in around 30 seconds. Once connected, the system will stop broadcasting/advertising. Advertising is important for most bluetooth devices like a pair of headphones as it allows you to find and connect to devices more easily. Advertising isn’t needed with Telos mesh as once added to a network there’s no need to disconnect and reconnect later.

The device switches permanently from “advertising” to “listening mode” where it listens for encrypted messages sent from the app. This means that you can’t find devices using bluetooth sniffers or bluetooth listening devices and the only device that can talk to the networks is one that has the network encryption key. If the network login or smart device that created the network is lost, then you need to reset each light on the network using the touchpad. Although this could be a long process, it guarantees the privacy and security of the network.